Tokyo Keiki / Tokimec

Tokyo Keiki / Tokimec

rx 05P0348a


 Tokyo Keiki ES-11A bearing

Used for gyrosphere Tokyo Keiki ES-11A

rx 05P0348a


Tokimec brush assembly

Used for: Gyrocompass Tokimec 

rx 05P0348a


 Gyrocompass Tokimec GM-20/21 features a synchro output, which can be used to drive the companion TOKIMEC PR-1500 Steering Control for decidedly low cost autopilot steering. There's also an automatic preset starup feature with a 24 hour range, so the GM-20/21 can be made all ready to go for the next trip. In addition, if a synchro amplifier is used with the GM-21, up to three repeater compass can be connected. The GM-20/21 is comprised of a master compass, which is normally mounted on top of the static inverter. If available space is limited, the static inverter can be remotely located on the bulkhead.

COMPACT DESIGN:

The GM-20/21 measures only 228 x 321 x 377 mm. So it can be easily installed on fishing boats and other small comercial vessels
LOW POWER CONSUMPTION: Power consumption is only 50 VA (for master compass)
EASE OF OPERATION
DIRECT READING AND SYNCHRO OUTPUT: Direct reading simplifies use considerably, and synchro output provides for low cost autopilot steering
THREE REPEATER COMPASS CIRCUITS
AUTOMATIC PRESET STARUP: A 24 hour timer permits automatic starup
POWER SUPPLY:
AC 100/110, 1Ø 50/60Hz, 60 VA (for repeater compass)
DC 24 V, 2A (with only master compass running)
VOLTAGE FLUCTUATION: ± 20%
AMBIENT TEMPERATURE: +500C - -200C
SETTLING TIME: Less than 4 hours
MECHANICAL: ± 450
FOLLOW UP SPEED: Turning ratio of 10 sec/rev
REPEATER: 90X synchro motor

rx 05P0348a


 Gyrocompass tokimec ES-110, the newest type of ES series, is a compact and popularized gyrocompass. It is especially designed for medium and small vessels' uses, by TOKIMEC's latest mechatronics technology. ES-110 gyrocompass can also be used as a direction sensor for a lot of navigational equipment.

 

MAIN POWER SUPPLY:

AC 100V 1Ø 50/60Hz for Master Compass at starting 250 VA
in normal operation 100 VA, for one Repeater Compass 40 VA
Voltage Fluctuation -20 % ~ +30 %
Frequency Fluctuation ±5 %
EMERGENCY POWER SUPPLY: DC24 V (only for Master Compass)
AMBIENT TEMPERATURE: -100C ~ 500C (at operation)
SETTLING TIME: Within 4 hours at Latitude 350
SETTLE POINT ERROR: Less than ± 10
FOLLOW UP SPEED: 240 / sec
GIMBAL FREEDOM: ± 400 for both rolling and pitching
LATITUDE ERROR CORRECTION: Manual (0 ~ ± 700)
REPEATER TYPE: 90 x Synchro Motor AC 100V 50/60Hz (7 circuits)
OPTIONAL OUTPUT: 1 x Synchro (15CX4)

 

rx 05P0348a


  Horizontal Amplifier PCB 

Used for: Gyrocompass Tokimec

rx 05P0348a


  Vertical amplifier PCB

Used for: Gyrocompass Tokimec

rx 05P0348a

 

  Tokimec synchro motor 15NT4(TS802E1)

   Used for: Gyrocompass Tokimec

rx 05P0348a


Tokimec servo motor

Used for: Gyrocompass Tokimec 

gyrocompass tokimec tg 6000


Gyrocompass Tokimec TG6000 features longer life and a diverse range of output signals, both the results of TOKYO KEIKI’s extensive experience in design and manufacturing. The TG-6000, in space-saving compact form, consists of two units, a master compass and control unit.

stepping motor gyrocompass tg6000


Type: KY56KM0-006

Used for: Gyrocompass Tokimec TG-6000

gyro sphere tokimec


Gyrosphere Tokimec

Used for: Gyrocompass Tokimec TG-3000, TG-5000, TG-6000, TG-8000, TG-8500

gyro repeater tokimec


Used for: Gyrocompass Tokimec