Radar Furuno FAR-2117

radar furuno far 2117

Radar Furuno FAR-2117 fully meet the latest performance standards of IMO and IEC for all ships and for ships under 10,000 GT, respectively. It is designed to meet the demands of today's maritime industry.

  Radar Fununo FAR-2117 has DVI (Digital Video Interface) facility integrated to deliver crisp and clear radar images. Target detection is enhanced by sophisticated signal processing techniques featuring superb short range detection. AIS information scheme can be incorporated when AIS transponder/receiver is interfaced, thereby further enhancing situation awareness of the operators. Radr Fununo FAR-2117 brings greater bridge performance and enhanced navigation accuracy, increasing both operating efficiency and safety level at sea.


FURUNO ARPA RADAR series FAR-21x7/28x7, FAR-21x7W/28x7W, FAR-21x7/28x7S and FAR-21x7/28x7SW fully comply with the following IMO and IEC standards:

  IMO A.694 (17): General requirements for shipborne radio equipment forming part of the global maritime distress and safety system (GMDSS) and for electronic navigational aids
 IMO A.813 (19): General requirement for electromagnetic compatibility (EMC) for all electrical and electronic ship's equipment
 IMO A.820 (19)*1: Performance standards for navigational radar equipment for HSC
 IMO A.823 (19)*1: Perforemance standards for Automatic Radar Plotting Aids (ARPAs)
 IMO MSC.64 (67) Annex 4*1: Recommendations on new and amended performance standards for radar equipment
 IMO MSC.191 (79): Performance standards for the presentation of navigation-related information on shipborne navigational displays
 IMO MSC.192 (79): Adoption of the revised performance standards for radar equipment
 SN/Circ. 217: Interim guidelines for the presentation and display of AIS target information
 IEC 60872-1 Ed 1.0 (1998)*2: ARPA performance requirements
 IEC 60936-1 Ed 1.1 (2002)*2: Shipborne radar performance requirement and unwanted emissions of radar systems
 IEC 60936-2 Ed 1.0 (1998)*2: Performance requirement for High-Speed Craft (HSC) radar
 IEC 60945 Ed 4.0 (2002): General requirements for maritime navigation and radio communication equipment
 IEC 61993-2 Ed 1.0 (2001): for AIS*3
 IEC 61162-1 Ed 3.0 (2007): for digital interface
 IEC 61162-2 Ed 1.0 (1998): for digital interface
 IEC 62388 Ed 1.0 (2007): Performance requirements, methods of testing and required test results

 *1 Superseded by IMO MSC.192 (79)
 *2 Superseded by IEC 62388
 *3 Limited to required Data content to display and process other ships UAIS information as defined in IEC 61162-1 Ed. 2 for digital interface

Read 748 times
More in this category: Radar Display RDP-119 »